Schwinn 430 Elliptical 2007 model Bedienungshandbuch PDF herunterladen (Seite 38)

MAINTENANCE

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the

necessary tasks.

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular

maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer

supplied components can be used to maintain and repair the equipment.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always

unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning,

maintaining or repairing the machine. Place the power cord in a secure location.

Daily:

Before each use, examine the exercise machine for loose, broken,

damaged, or worn parts. Do not use if found in this condition. Repair

orreplaceallpartsattherstsignofwearordamage.Aftereach

workout, use a damp cloth to wipe your machine and Console free of

sweat.

Note: Avoid excessive moisture on the Console.

Weekly:

Check for smooth roller operation. Wipe the machine to remove dust,

dirt, or grime. Clean the rails and surface of the rollers with a damp

cloth.

Apply silicone lubricant to a dry cloth and wipe the rails to eliminate

roller noise.

Note: Do not use petroleum based products.

Monthly

or after 20 hours:

Make sure all bolts and screws are tight. Tighten as necessary.

NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of

moisture.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

Schwinn 430 Elliptical 2007 model Bedienungshandbuch Seite 38