Schwinn Active series 20 series Bedienungsanleitung

Nautilus® Bowflex® Schwinn® Fitness Pearl Izumi® StairMaster® Universal® Nautilus Institute®Assembly Manual 20 Series Recumbent Bike001-72

Assembly Steps3-1: Connect the Lower Pulse Wire (22) to the Middle Pulse Wire (23) as shown in Figure 3A. 3-2: Slide the Rail Tube Assembly (5) o

Assembly Steps4-1: Attach the Rear Stabilizer Bar (3) to the Rail Tube (5) using 4 Hex Screws (16) and 4 Flat Washers (17). Note: Make sure the R

Assembly Steps5-1: Attach the Handlebar (6) to Saddle Support Frame (4) using 4 Hex Screws (26) and 4 Flat Washers (17) as shown in Figure 5. 5-2:

Assembly Steps6-1: Install Saddle (7) and Back Cushion (8) onto the Saddle Support Frame (4) using 8 Phillips Screws (20). Insert the Phillips Scre

Assembly Steps7-1: Feed Lower Pulse Wire (22) and Lower Computer Wire (24) through the Front Post (31). 7-2: Install the Front Post (31) onto the

Assembly Steps8-1: Insert the Adjustment Handle (29) into the handle mount (see Detail A). Finish install by tightening Screw (30). Note: Do not o

Assembly Steps9-1: Install the Left Pedal (11) to Left Crank (19). Install Right Pedal (12) to the Right Crank. Note: The Left Pedal has a left h

Assembly StepsStep 10: Final Inspection10-1: Tighten all hardware.10-2: Read warnings on machine.Please read and refer to the Owner’s Manual for:•

AssemblyAssembly Manual18

Contact InformationUNITED STATES OFFICES:E-mail: [email protected]/CUSTOMER SERVICEPhone: 800-NAUTILUS (800-628-8458)Fax: (877)

Table of ContentsProduct SpecificationsProduct Specifications ...2Safety Warnings

Nautilus® Bowflex® Schwinn® Fitness Pearl Izumi® StairMaster® Universal® Nautilus Institute®©2008. Nautilus,

Safety WarningsThis icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.Before using this equi

Exploded DrawingNote: Some component images are for general reference only and may not represent the actual shape or detail of the part. Assembly is

Parts ListPARTS LISTRef. Description Qty1 Main Frame 12 Front Stabilizer 13 Rear Stabilizer 14 Saddle Support Frame 15 Rail Tube 16 Handl

Hardware GuideRef. Description Qty13 Carriage Bolt M10 x 70mm 2pcs 14 Acorn Nut M10 2pcs15 Arc Washer ID 10.5mm; OD 25mm; T 1.5mm 2 pcs

AssemblyBasic Assembly PrinciplesHere are a few basic tips that will aid in the assembly process. By using these principles, you can simplify each pro

Assembly Steps1-1: Install Front Stabilizer (2) to Main Frame (1) using 2 Carriage Bolts (13), 2 Arc Washers (15), and 2 Acorn Nuts (14) as indicate

Assembly Steps2-1: Slide Saddle Support Frame (4) onto Rail Tube (5) as shown in Figure 2. The wires from the Rail Tube pass through the Saddle Supp