Schwinn String-Ray Three-Speed Supplemental Bedienungshandbuch PDF herunterladen

Special Assembly Instructions for StingRay Chopper Fork

Please read these instructions before assembling your StingRay chopper.

Step #1:

Insert one fork leg through the lower crown, and slide it up until it contacts the bolt in the upper crown. Push

the leg up to remove the red stop sign decal from the fork leg. Using a 5mm hex (Allen) wrench align the upper

crown bolt with the fork leg, and tighten upper crown bolt completely into the fork leg. Repeat for other fork leg.

fork

leg

lower

fork

lower forklower

crown

upper fork

crown

remove decal

Step #2:

Align the fork legs so that the axle dropouts face

forward. Install front wheel making sure that the

brake arm slot is aligned with the pin on left fork

leg. Be sure that pin slides into slot in brake arm.

Tighten front axle nuts completely.

If you have any questions, please consult your Owner’s Manual or call Paciﬁ c Cycle Service Line at 1.800.626.2811

or email Paciﬁ c Cycle Service at: service@paciﬁ c-cycle.com.

Step #3:

Using 5mm hex (Allen) wrench, tighten the two

lower fork crown pinch bolts completely. Please

note that these bolts should be tightened until the

fork is secure only, DO NOT OVER TIGHTEN, or

damage to the lower fork crown may occur.

Schwinn

StingRay front and rear reﬂ ector assembly:

® StingRay front and rear reﬂ ector assembly: ®

1) Locate front reﬂ ector brackets and screws in the parts box.

2) Assemble clear front reﬂ ector to lower fork crown using (2) screws provided. Face reﬂ ector forwardand

tighten (2) screws securely. Reﬂ ector bracket should be -/+ 3 degrees from vertical (90 degrees).

3) Assemble red rear reﬂ ector bracket to rear fender using (2) screws provided. Face rear reﬂ ector towards

back of bike, and tighten (2) screws securely.

1 2 3

Inhaltsverzeichnis

Seite 1

Special Assembly Instructions for StingRay Chopper ForkPlease read these instructions before assembling your StingRay chopper.Step #1: Insert one fork

Seite 2

StingRay 3 Speed Band Brake Assembly InstructionsPlease read these instructions before assembling your StingRay chopper.If you have any questions, ple

Seite 3

StingRay 3 Speed Shifter Assembly InstructionsPlease read these instructions before assembling your StingRay chopper.If you have any questions, please