Schwinn SR23 Handbuch PDF herunterladen (Seite 18)

ASSEMBLY INSTRUCTIONS

Step 9 Install Seat Assembly

Parts:

• Seat Assembly (From Steps 3 through 7)

• Seat Rail (Ref. H)

• Seat Rail Bracket (Ref. D-22)

Tools:

• Supplied Allen Wrench

NOTE: To ease assembly, use two people for this step.

9-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the

Seat Assembly onto the Seat Rail (H). Release the Adjustment Knob to

lock the Seat Assembly in place.

NOTE: Make sure the seat Adjustment Knob is on the side of the

Seat Rail that has the holes.

9-2 Reinstall the Seat Rail Bracket to the Seat Rail making sure the Tab of the

Bracket faces forward.

9-3 Reconnect the Heart Rate Wires and reinstall the Seat Rail with

Seat Assembly on the main unit. (Figure A)

NOTE: After reconnecting the Heart Rate Wires, tuck them into

the hole in the frame to avoid pinching the wires.

9-4 Connect the Heart Rate Wire (M) to the jack on the junction box labeled

“HAND PULSE”. (Figure B)

NOTE: To access the Junction Box you may have to loosen the knob

on the Seat Back, raise it upward then re-tighten the knob.

This also how you adjust the Seat Back to position

the lumbar support to your preference.

D-18

D-22

K-3

D-22

Figure A

Figure B

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

Schwinn SR23 Handbuch Seite 18